Steel Grating 
Home  >   Products  >   Steel Grating 

Bar Grating Clips & Fasteners

Inquire Now
Bar Grating Clips & Fasteners

Saddle Clips

The saddle clip bridges two bearing bars and is attached with 1/4″ self-tapping bolt, 1/4″ self threader, 1/4″ weld stud or 1/4″ bolt and nut when hole is drilled through supporting flange. Available for 15/16″, 1-3/16″ and 1-3/8″ bearing bar spacings (15, 19 and 22 space) in carbon and stainless steel. Fasteners should be specified separate from clips. (Fasteners available in Self tapping, or Bolts with nuts and washers included).

Bar Grating Clips & Fasteners

G Clips

Fastens grating to a horizontal-facing steel structural member edge.

The model GG- describes an assembly of fastener parts identical but for materials of construction, that each contain three common parts. First is a G-Clips unique top for better holding strength and to suit 19W4 grating. Second, a G-Clips patented bottom connects to the beam underside. A hex-headed cap screw connects the two, and its length suits the grating height being installed.

Bar Grating Clips & Fasteners

Grate Fast Clips

The Type GF Grate-Fast Fastener enables rapid and secure connection of open grate flooring to steel sections. Grating can be connected by one man only, working from above, without the need to drill the steel, or weld on site.

The standard product (LGF037) consists of a pre-assembled top-hat bracket, socket head cap screw and body casting and provides the additional benefit of increased clamping force over lower quality clips.

For specific applications, it can be supplied with an off-set top-hat bracket (see option 2) to accommodate non-standard grating bars.

Bar Grating Clips & Fasteners

Weld Lugs

Weld lugs may be used for installations where grating is subject to removal. Weld lugs are shop fabricated and must be specified at time of grating order. Fasteners are 1/4 minimum and supplied by others. Location is the same as Attachment Locations diagram.

Bar Grating Clips & Fasteners

Attachment Locations

Attachments should be placed at intermediate supports in the middle of the panels and at four bearing bar ends, 6 from each side of panel. Welds should be 3/16 fillet welds, 3/4 long. Heavy-Duty grating may require additional welding to meet application needs.

Technical Information

Why Choose Yilida for Your Bar Grating Accessories?

Yilida company has an unrivaled track record dating back to 1992 for providing fast, cost-effective metal and steel product solutions. Since the beginning, our goal has been to provide our customers with high-quality products backed by the best service and support in our industry. Our modern 6,660-square-meter facility, located in Anping Hebei province. We also had a complete in-house fabrication shop where we can customize any of our stock products to meet virtually any customer requirement.

Copyright © Anping Yilida Metal Wire Mesh Co., Ltd. All Rights Reserved   
Sitemap | Technical Support: